Home About us Technology Products show Contact us  
  Products categories
O-ring
X-ring
Gasket
Household-FDA
watchstrap
Others
  Technology
Meterial-NBR
2010/11/8   Click : 5578  From : 

Acrylonitrile-Butadiene (NBR)
Copolymers of butadiene and acrylonitrile are known by several generic names, Buna N, Nitrile Rubber and NBR. The acrylonitrile content of NBR compounds varies considerably (18% to 50%) and influences the physical properties of the finished material.
The higher the acrylonitrile content, the better the resistance to oil and fuel. At the same time, elasticity, compression set resistance to low temperature is adversely affected. The lower acrylonitrile content obtains, the better low temperature resistance, but sacrifice some resistance to oil and fuel. In view of these opposing realities, a compromise selection is the medium acrylonitrile content rubber. NBR has good mechanical properties when compared with other elastomers and high wear resistance.
NBR is not resistant to weathering and ozone. Some special compound can improve this defect or use NBR/PVC blending compound which has excellent weathering and ozone resistance and good resistant to fuel but compression set is not so good.

SERVICE TEMPERATURE
For NBR the service temperature can be designed from -55℃ to 100℃ or up to 125℃ depending on different acrylonitrile content and formula. Generally higher than 100℃, life time will be shortened.

HARDNESS
40 to 90 Shore A are available.

COLOR
Black, brown, green, white, rust, yellow, blue, red, orange, and gray are available, or any assigned color from customers.

APPLICATION
NBR compounds have excellent resistance to abrasion, non-polar oils and solvent, water and permeation (higher acrylonitrile content will be better). NBR also can be used in conditions of dilute acids, alkalis and salt solution at low temperatures.
Applying in aromatic hydrocarbons, chlorinated hydrocarbons and polar solvents are not suitable

Standard Products List

Durometer Shore A

Color

Polymer

Comments

70

Black

NBR

Std. Compound M2BG714

70

Black

NBR

Sulfur cured Meet FDA 21CFR177.2600 Class II spc.

70

Black

NBR

Sulfur cured Meet FDA 21CFR177.2600 Class I (contact with milk & edible oil, carbon black below 10%) spc.

70

Black

NBR

General Peroxide curing

70

Black

NBR

40% ACN compound, good fuel resistance

70

Black

NBR

Std. Compound, molysulfide internal-lubrication

70

Black

NBR

Std. Compound, PTFE internal-lubrication

70

Black

NBR

Sulfur cured Meet FDA 21CFR177.2600 Class II spc. Compatible with ABS, LAXAN, Polycarbonate

70

Black

NBR

NBR/PVC blending, excellent ozone resistance, good fuel resistance

70

Black

NBR

Higher heat resistance M2CH714 A25 EO15 EO35

70

Black

NBR

18% ACN compound, excellent low temperature resistance(-55℃) M2BF712

50

Black

NBR

Std. Compound improve ozone resistance 50pphm

70

Black

NBR

40% ACN compound, peroxide cured, good fuel resistance

70

Black

NBR

Higher heat&oil resistance M2CH714 A25 EO16 EO36, Compatible with ABS, LAXAN, Polycarbonate

70

Black

NBR

40% ACN compound, meet FDA 21CFR177.2600 Class II, good fuel resistance

70

Black

NBR

NSF61 approval M2BG714

70

Black

NBR

Std. Compound erucamide internal-lubrication

60

Black

NBR

Insulation, resist to 2kV

70

Black

NBR

Sulfur cured Meet FDA 21CFR177.2600 Class II spc., erucamide internal-lubrication

50

Black

NBR

Good resistant to oil, below 60 Shore A M2BG512 A14B14EO14EO34

65

Black

NBR

Std. Compound graphite internal-lubrication

70

Black

NBR

Std. Compound oleamide internal-lubrication

70

Black

NBR

Std. Compound for adhesion metal seal

50

Black

NBR

Low hardness and high strength, good resistant to oil, M2BG517 A14 B14 EF11 EF21 EO14EO34

82

Black

NBR

Good resistant to impact

90

Black

NBR

Non-nitrosamine

70

Black

NBR

Std.Compound made in China plant of GE MAO

【Back】
Copyright ©  Nice Rubber  Co. Ltd All Rights Reserved. 技术支持: 知讯网络
在线咨询
网站建设